Pianos consistently make movers annual list of items that are most regularly damaged. Grand pianos are particularly bothersome. Practicing the following treatments for dismantling, padding and loading grand pianos will prevent damage, lower claims cost, and enhance client fulfillment.
1) At least three people are needed to deal with a baby grand piano. If the infant grand piano requires to increase or down stairs or if a complete or show grand piano requires to be transported, a minimum of four people are needed.
2) Constantly finish a accurate and comprehensive stock. It may be more suitable or essential to utilize a visual stock to sufficiently explain and show pre-existing damage.
3) As various parts are dismantled, please place all hardware in a properly identified parts bag and after that put the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furniture pad.
5) Detach the lid by eliminating the hinge pins. Wrap the cover in a clean furniture pad.
6) Eliminate the prop that holds the cover open and wrap it in a tidy furnishings pad. The prop has a hinge pin and is in two pieces.
7) Remove the pedal assembly and cover it in a tidy furniture pad. The braces at the rear of the assembly rest in slots at each end. When getting rid of the screws, please beware not to drop the braces. In addition, please be particularly careful with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from delegated right as "1", "2", and "3", by positioning a piece of masking tape with the appropriate number on each rod. Note: If masking tape is unavailable, please use properly labeled parts bags for this purpose. When reassembling at destination, please make sure to put the rods in the appropriate order so that the pedals will work effectively.
8) Pad the piano by placing a tidy rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you handle the piano. Keep in mind: Please guarantee that the surface of the piano is dust-free prior to padding it.
9) Position a piano board and attach the straps so that it is prepared to receive the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Get rid of the left front leg by positioning one individual beneath the piano at the left end of the keyboard. The other 2 people must support the left front corner. The person underneath the piano must turn the maintaining block so that the long end points away from the leg. The screws, if there are any, must then be gotten rid of. The "underneath" individual should then extricate the piano before really getting rid of the leg. Be sure to have two people raising the corner of the piano check here while the third person gets rid of the leg. Keep in mind: Please be sure to note which legs were eliminated from which positions considering that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to lift the whole piano somewhat while completing this maneuver to prevent excessive pressure on the remaining, connected legs as the piano ideas. Be sure that the piano is centered comfortably against the brace at the end of the piano board.
12) Get rid of the two remaining legs and cover them in clean furnishings pads. These legs are held in location by a "key and slot" plan. To remove the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Secure the piano to the piano board by bringing completions of the straps together and fastening them. Location folded burlap pads over the furnishings pads but under the straps to offer extra defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for protection against house damage, place the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the leading end of the piano board to avoid the piano from slipping.
16) To fill the piano, this content leave it on the piano board and place it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The very best place to load the padded lid is between the piano and the preceding tier or between the wall and the piano.
Although grand pianos represent a substantial difficulty, they can be moved without damage by utilizing typical sense and practicing the treatments noted above.